What is the depth of the die, as the name suggests, refers to the depth of the punch into the die, this value should be based on the depth of the die mouth minus the punch or die fillet Radius calculation. In principle, the thickness of the material should not exceed 1. When the material can be separated, less input and less output should be used to avoid the service life of the mold.

What is the die depth of the stamping die

As the name suggests, stamping process and die design refers to the depth of the die into the die, and its calculation method is to subtract the radius of the die or die from the depth of the die. In principle, the thickness of the material should not exceed 1. When the material can be separated, there should be less input and less output, so as not to cause the service cycle of the mold. When producing stainless steel products, the depth of the die can be designed with reference to the bending data of low carbon steel, but a smaller die should be preferred when trying out the die, because the depth of the die will inevitably increase the workload of polishing.